10. PICTURE DISPLAY (PIC)
100
10.6.3
Displaying Gamut Errors
To display gamut errors on the picture, follow the procedure below. The gamut error level
display range can be set in the status display.
This setting is displayed when GAMUT ERROR, COMPOSIT GAMUT, or LUMA ERROR is
set to a value other than OFF on the status display.
This setting is not available when D_LINK FORMAT is set to XYZ12bit in the system
settings. This setting does not appear.
[Reference] GAMUT
ERROR
→
Section 14.5.6, “Detecting Gamut Errors”
COMPOSIT GAMUT
→
Section 14.5.9, “Detecting Composite Gamut Errors”
LUMA ERROR
→
Section 14.5.11, “Detecting Luminance Errors”
D_LINK FORMAT
→
Section 5.1.4, “Setting the Input Format”
Procedure
PIC (press and hold)
→
F•4 DISPLAY
→
F•2 GAMUT ERR DISP
Settings
OFF:
Gamut errors are not displayed. This is the default setting.
WHITE:
The picture intensity is halved, and gamut error locations are marked in
white.
RED:
The picture intensity is halved, and gamut error locations are marked in red.
MESH:
Gamut error locations are covered with a mesh pattern.
GAMUT ERR DISP = OFF
GAMUT ERR DISP = WHITE
GAMUT ERR DISP = RED
GAMUT ERR DISP = MESH
Figure10-15 Gamut error displays