5. SYSTEM SETTINGS (SYS)
42
5.4.3
Displaying the Input Format
To show or hide the input format, follow the procedure below.
Procedure
SYS
→
F•2 DISPLAY
→
F•4 INFORMATION
→
F•3 FORMAT
Settings
ON:
The input format is displayed in the upper left of the screen. This is the default
setting.
OFF:
The input format is not displayed.
5.4.4
Selecting the Input SDI Signal Display Format
To select the input SDI signal display format, follow the procedure below.
You can set a user-defined ID for each channel by following the procedure in section 5.3.1,
“Creating an ID.”
Procedure
SYS
→
F•2 DISPLAY
→
F•4 INFORMATION
→
F•4 INPUT INFO
Settings
ID:
The input SDI signal ID is displayed at the top of the screen in the center.
When the link format is set to dual, the ID for channel A is displayed.
CHANNEL: The input SDI signal channel name is displayed at the top of the screen in the
center. This is the default setting.
OFF:
The input SDI signal is not displayed.
5.5
Remote Settings (Option)
To configure remote settings, press F•1 REMOTE SETUP in the system menu.
F•1 REMOTE SETUP appears when the remote option is installed on the LV 5380. The
settings that you specify here will not be initialized even if you initialize the settings by
following the procedure described in section 5.7.1, “Initializing the Settings.”
You can configure the preset loading method, the alarm signal polarity, and the channels
whose errors are indicated by the alarm signal.
[Reference]: Section
15.1, “Remote Control Feature”
SYS
→
F•3 I/F SETUP
→
Figure5-7 REMOTE SETUP menu