14. STATUS DISPLAY (STATUS)
180
14.5.1
Detecting CRC Errors
To detect CRC errors, follow the procedure below. If you set this setting to ON, the number
of CRC errors appears next to CRC (VIDEO) in the status display.
This setting is valid when the input SDI signal is HD.
Procedure
STATUS (press and hold)
→
F•4 ERROR CONFIG
→
F•1 VIDEO ERROR
→
F•1 CRC
Settings
ON:
CRC errors are detected. This is the default setting.
OFF:
CRC errors are not detected.
14.5.2
Detecting EDH Errors
To detect EDH errors, follow the procedure below. If you set this setting to ON, the number
of EDH errors appears next to EDH in the status display.
This setting is valid when the input SDI signal is SD.
Procedure
STATUS (press and hold)
→
F•4 ERROR CONFIG
→
F•1 VIDEO ERROR
→
F•2 EDH
Settings
ON:
EDH errors are detected. This is the default setting.
OFF: EDH
errors
are not detected.
14.5.3
Detecting BCH Errors
To detect BCH errors, follow the procedure below. If you set this setting to ON, the number
of BCH errors appears next to BCH in the status display.
This setting is valid when the input SDI signal is HD.
Procedure
STATUS (press and hold)
→
F•4 ERROR CONFIG
→
F•2 AUDIO ERROR
→
F•1 BCH
Settings
ON:
BCH errors are detected. This is the default setting.
OFF: BCH
errors
are not detected.