6. MULTI-SCREEN DISPLAY FEATURE (MULTI)
50
INPUT MODE = SINGLE
INPUT MODE = DUAL
INPUT MODE = 3D ASIST
Figure 6-3 Selecting the display mode
6.3
Selecting the Multi-Screen Display Format
When F•1 INPUT MODE is set to SINGLE or DUAL, follow the procedure below to select the
display format of the multi-screen display.
Procedure
MULTI (press and hold)
→
F•2 DISPLAY MODE
●
1-channel display
Settings
PIC+WFM1: The picture and video signal waveform displays are displayed on top of each
other. This is the default setting. The SDI signal information and the error
counter do not appear at the top of the screen.
The video signal waveform can be changed to the histogram display.
PIC+WFM2: The picture and video signal waveform displays are displayed on top of each
other. The SDI signal information and the error counter do not appear at the top
of the screen.
The video signal waveform can be changed to the histogram display.
P+W+V:
The picture, video signal waveform, and vector displays are displayed at the
same time.
P+W+V+A: Shows the picture, video signal waveform, vector, and audio meter displays at
the same time.