11. VIDEO SIGNAL WAVEFORM DISPLAY (WFM)
117
11.5
Line Selection and Sync Signal Settings (LINE SEL EXT REF)
To configure line selection and sync signal settings, press F•3 LINE SEL EXT REF in the
video signal waveform menu. You can display the waveform of the selected line and switch to
an external sync signal.
The line select display cannot be used on the 2-channel display or 3D assist display.
WFM (press and hold)
→
F•3 LINE SEL EXT REF
→
Figure 11-15 LINE SEL EXT REF menu
11.5.1
Displaying the Waveform of the Selected Line
To display the waveform of the selected line, follow the procedure below.
Changing this setting will also change the picture display and vector display line selection
settings.
Procedure
WFM (press and hold)
→
F•3 LINE SEL EXT REF
→
F•1 LINE SELECT
Settings
ON:
The waveform of the selected line is displayed.
OFF:
The waveforms of all lines are displayed overlapping each other. This is the
default setting.
LINE SELECT = ON
LINE SELECT = OFF
Figure 11-16 Turning line selection on and off