12. VECTOR DISPLAY (VECT)
136
12.4
Line Selection and Sync Signal Settings (LINE SEL EXT REF)
To configure line selection and sync signal settings, press F•3 LINE SEL EXT REF in the
vector menu. You can display the vector of the selected line and switch to an external sync
signal.
The line select feature cannot be used in the 2-channel display.
VECT (press and hold)
→
F•3 LINE SEL EXT REF
→
Figure12-6 LINE SEL EXT REF menu
12.4.1
Displaying the Vector of the Selected Line
To display the vector of the selected line, follow the procedure below.
Changing this setting will also change the picture display and video signal waveform
display line selection settings.
Procedure
VECT (press and hold)
→
F•3 LINE SEL EXT REF
→
F•1 LINE SELECT
Settings
ON:
The vector of the selected line is displayed.
OFF:
The vectors of all lines are displayed overlapping each other. This is the
default setting.
LINE SELECT = ON
LINE SELECT = OFF
Figure12-7 Turning line selection on and off