42
Once in the correct screen, select a number to go to the desired function. An explanation of
each of the functions is given below.
3.5.1
FUNCTION 1 : VIEW LIMITS
The 6600 checks both the Target values and the Actual values to determine if they are within
specific limits. These limits can be set by the user. To view these limits, you can press the
Function Select key and then choose Function 1 (View Limits) by pressing “1”. The VIEW
LIMITS screen appears as shown below.
VIEW LIMITS
1. max. knots = 500.0 4. max. feet = 50000
2. max. Dfin = 3.0 5. min. feet = -2000
3. max. mach = 1.000 6. max. ft/min.= 6000
To exit from this screen, press CANCEL.
For an explanation of the limits please refer to the “Set Limits” function.
3.5.2 FUNCTION 2: SET LIMITS
To set the limits, press 2 on the Function Select screen. Access to the “Set Limits” screen is
protected by means of a password. Enter the password followed by the ENTER key on the
screen shown below.
SET LIMITS
Please enter password :
.
The correct password will take you into the “Set Limits” screen shown below.
SET LIMITS
1. max. knots = 500.0 4. max. feet = 50000
2. max. Dfin = 3.0 5. min. feet = -2000
3. max. mach = 1.000 6. max. ft/min.= 6000
Summary of Contents for 6600
Page 10: ...3 Figure 2 1 A...
Page 11: ...4 Figure 2 1 b...
Page 15: ...8 Figure 2 2...
Page 16: ...9 Figure 2 3...