41
Pump section OK
Ps1, Ps2 control system OK
Pt control system OK. Tests successful.
After the tests have been completed successfully, press the CANCEL key to return to the Main
Operating Screen.
If any of the tests fail, then note the failure, turn OFF the unit and contact the factory.
3.5
FUNCTION SELECT SCREEN
There are 8 different functions that can be performed. These are:
1.
View Limits
2.
Set or Change Limits
3.
Set or Change the knots rate
4.
View or Execute profiles
5.
Setup profiles
6.
Height Correction
7.
Set Ground
8.
Go To Ground
From the Main Screen, either in the 2-output or 3-output format, pressing the “Function
Select” key on the keypad allows you to go into the function select screen which is shown
below.
Select function ( DN ARROW for functions 4 to 8 )
1. View limits
2. Set limits
3. Set knots rate … now at 500.0 kts/min
If you want to select functions 4 through 8, press the Down Arrow key on the keypad to move
to the screen shown below.
Select function ( UP ARROW for functions 1 to 3 )
4. Execute profile 5. Set profiles
6. Height Correction 7. Set “Ground”
8. Go to “Ground”
Summary of Contents for 6600
Page 10: ...3 Figure 2 1 A...
Page 11: ...4 Figure 2 1 b...
Page 15: ...8 Figure 2 2...
Page 16: ...9 Figure 2 3...