24
3
-output format
Units: knots Feet Feet
Actual: M 101.2
1006 M
1005 M
Target:
20.0
10
0
Error Messages :
The Main screen is also used to display error conditions as they
occur. The errors are displayed on the last (4
th
) line of the display, as shown below. Errors are
shown on the 4
th
line on both 2-output and 3-output formats.
2-output format
Units: knots Feet/min
Feet
Actual: M 101.2
3500
1005 M
Target:
20.0
3000
0
Error 5: Pt target exceeds knots limits
Profile Execution :
When a “profile” is being executed, the 4
th
line of the display will
indicate the profile number and the point in the profile. This is done identically on both 2-
output and 3-output formats. A sample screen is shown below, where point number 12 of
profile number 3 is being executed. Notice that this sample screen shows some of the values
to be different from our previous sample screens. The essence of using profiles is that all the 7
parameters can be changed simply by moving to the next point in the profile, eliminating the
need to perform a lot of data entry.
2-output format
Units: knots Feet/min
Feet
Actual: C 101.2
3500
1005 C
Target:
200.0
6000
5000
Executing Profile 3.12 Lear-55 ADC
For more information on profiles, please refer to Section 4.
The Main operating screen will be used almost all the time during normal operation for
commanding target values, viewing actual values, setting units and modes.
Summary of Contents for 6600
Page 10: ...3 Figure 2 1 A...
Page 11: ...4 Figure 2 1 b...
Page 15: ...8 Figure 2 2...
Page 16: ...9 Figure 2 3...