SPRAY BOOTH USER MANUAL
- 2 -
Chapter 2 Spray Booth Description
2.1 The Struction Description
The spray booth is composed of the following parts:( shown in Fig.2.1)
Fig. 2.1
1
)
The main room:
-
The base parts: Side metal panel,Back metal panel,Front metal panel,Middle supporting,Strenthen
bar for basement,Support net for filter,Galvanization air block panel,Floor filter grids,Ramp for auto
enter.
-
The body parts: wall board(20) with or without side light,front door(19) with (including horizontal
boardand stand board,safe door(17),surround pieces of wall board ect.
-
The top parts(air cabint) : top sealed board(5),lighting frame(2),filter slot panel,supporting for the
filter,roof supporter beam(4,6),filter,roof cover(1).
-
Ramp(18):grids style or vein board style.
2
)
Generator parts
-
Bottom of heat-air generator
-
Middle frame of generator(13) :including the intake fansr and heat exchanger
-
Burner(14),diesel burn for standard model and gas burner for optional.
-
Top-frame for generator(12)
、
the connection part between top frame and air cabint