![background image](http://html1.mh-extra.com/html/launch/cch201/cch201_user-manual_3854031007.webp)
SPRAY BOOTH USER MANUAL
- 5 -
-
The overhead lights are steel plates coated with paint ,in which four neon holders are positioned,
each of which fits four neons of 36 W, the neons are isolated from the spray painting environment by
panes of glass as the same type ot it used for the doors.
-
In order to reach the better illustration effect,we usually install the side light in the side wall, the neons
are isolated from the spray painting environment by panes
4)
Ceiling
The ceiling acts as both a cover for the spray painting environment and supporting for the air filters at the
entrance, it is composed of: (shown in Fig.2.5)
Fig. 2.5
-
Top lights, including the neons of the illumination of the booth, they are the parts of the air cabin.
-
The filter frame, which are hanged with the top sealing panel.
-
Roofs, they are plates of zinced plate that are necessary for the cover of the booth.
-
The iron supporting beams, intercross by horrizontal beams and longitudinal beams,which are used
for supporting the ceiling.
-
Top sealing panel is installed on the supporting beams.And the top sealing pannel are necessary to
cover the ceiling and hold up the filter frame
5
)
basement
The basement serves as a
plenum chamber which lead the exiting air from the booth. It is composed
of(shown in Fig.2.6)