SPRAY BOOTH USER MANUAL
- 33 -
Chapter 5 Maintenance and Repair
5.1 Ordinary Maintenance
Maintenance has to be a preventive and planned activity, seen as fundamental need to obtain safety, as a
presupposition that the machines and the apparatus are subject to wear which is apotential cause of
breakdowns.Therefore the safety of the booth depends also on a good preventive maintenance that
aflows the substitution of the objects subject to wear out before the verification of the technical faults.
Please carrying out the maintenance intervention /cleaning as the following ordinanry
maintenance and frequency verification instructions:
-
Keep the booth clean and keep the intake and exhaust duct be open.
-
Change the top filter after painting 200sets of auto or use more than one year,But in the more dust
situation,that should be shorten the filter changed period according to the actual condition.
-
Change the Pre-filter after painting 200sets of auto or use more than one year.
-
Change the flour filter after painting 200sets of auto or use more than one year.
-
Clean the filter oil cup and fire nozzle of the burner each week,keep the oil route be through.
-
Add the diesel oil is forbidden when the burner is working.
-
Make sure there are more than 5L oil in the oil tank,use Non diesel oil is forbidden.
-
Check the filter net of the activatied charcaod environmental cabinet after painting 20sets of auto or
use more then 1 mouth.If the painting adhibit to the filter net fulled,change the filter net in time and
keep the ventination be through.
-
Check the heat exchanger every two months,examine whether have the bad welded
phenomena,make sure saftey enough.
-
Clean the dust adhered to the fans and blades semiyearly
-
When you don’t operate the booth for a long periods,cut off the general power,and open the door for
ventination every three days,in case accumulate the moisture air inside the booth.
-
Change the heat exchanger and all of the electric wire when using more than 8 years.
Maintenance in time is necessary,but the appropriate maintenance is also very
important,you should abide to the following mainly maintenance method and attention
problem
5.2 Ordinary Maintenance Instruction
The procedures of ordinary maintenance as a rule are done by qualified and authorized
personal and however, before beginmng the maintenance, the following functions have to
be done.
-- Remove the motorvehicle from the spray painting environment.