![background image](http://html1.mh-extra.com/html/launch/cch201/cch201_user-manual_3854031005.webp)
SPRAY BOOTH USER MANUAL
- 3 -
-
Damper(11) for change between painting and baking system.
-
Exhaust system: exhaust fan with pre-filter(9),Active carbon environment system as option(11)
-
Smoke tube(15):connect with heat-exchanger,take the heat out.
-
Air duct(7):exhaust duct is necessary and intake duct as option.
3
)
Oil tank with frame.
4
)
Control system(16)
:
control the motor,burner,light system ect.
2.1.1 The Main Room
The spray painting environment is the closed place when the spray painting and the drying process is
carried out. it is divided into the following parts:
1
)
Side walls
The side walls are necessary to isolate the spray painting environment from the outside,both from the
thermal and acoustic point of view, and above all so as not to disperse the paint and solvents residue into
the environment, it is formed by: (shown in Fig.2.2)
Fig 2.2
-
Side walls made of panels, with a thickness of 50 mm, modular types with tongue and groove
jointed,inserts with added seals. The thermic insulation of the spray painting environment is warranted
by the layer of expanded polyurethane or rock wool contained in the panels.
-
Back walls, panels made of the same type as the side walls.
-
Metal covers up the wall, are necessary for the up cover of the walls
,
which make each panel connect
together and easy to install the ceilling cover.
-
Back corners, that are necessary for the connection between the side walls and the back wall.
2
)
Front walls
The front wall of the booth is composed of : (shown in Fig.2.3)