![background image](http://html1.mh-extra.com/html/launch/cch201/cch201_user-manual_3854031010.webp)
SPRAY BOOTH USER MANUAL
- 8 -
Fig. 2.8
-
Switch to block main doors
-
Drying process Timer(2), it is necessary in order to regulate the drying process.
-
Temperature meter(1), it is necessary to regulate the temperature of the air both for the spray painting
and drying process.
-
Burner indicator(3), it indicates the burner is opertation or not.
-
Burner Break down alarm(4), it alarms if there are something wrong about the burner.
-
Light switch(6),turn on or turn off the up and side light.
-
Emergence stop button (8),which can cut off the power when the emergence happen.
-
Selector switch of Painting and drying process(7), allows the passage from the spray painting phase
to the drying process and rise temperature painting.
-
Over load alarm(10), it alarms if the motor over-load or over-heat.
-
Start button(9), press it when you want to start the fans.
-
Power ON/OFF(11), turn the key when you want to start or close the power.
-
Power Indicator(13), it indicates the power is on or off.
-
Motor operation Indicator(12), it indicates the motor is on or off.