SPRAY BOOTH USER MANUAL
- 32 -
4.3.3 Machine Stop
To stop the booth before the foreseen time it is necessary to:
1. Turn the burner switch onto the OFF position
(
Middle position
)
.
2. Open the gate of the booth and let the vehicle out.
3. Switch off the lights if they are on
4. Turn the general switch onto the OFF position.
5. Wait for about 15 minutes in order to get the air condition inside the booth,then close the main doors.
ATTENTION: After drying,if there is more heating or exhaust air inside the booth,it is
necessary to start again from the spray painting cycle in order to allow the reinstatement
of the initial condition with an adequate ventilation.