Laserscale SET-HD100, Instruction Manual

Page: 51 / 74

SET-HD100
(E)
7
3-1-3. Example of Installation Procedure
Th e installation method diff ers according to the machines used by the customer and the machine
installation conditions, etc. An example of an installation procedure is described below.
Checks and Adjustments before Installation
Be sure to always check the mounting surfaces before installation.
1
Check the scale unit mounting surface
Check the parallelism between the scale unit mounting surface and rotational surface while rotating
the rotating part of the machine.
<Examples of check methods>
• Set a dial test indicator against the scale unit mounting surface and measure.
• Set an optical parallel on the scale unit mounting surface and measure with an auto-collimator.
Scale unit mounting surface
Rotating part
Dial test indicator
2
Adjust the head unit mounting surface
Adjust the clearance between the scale unit mounting surface and the head unit mounting surface.
<Specifi cations>
See section 8 “Specifi cations.”
<Example of check method>
• Use gauges or other tools and measure the distance between the two surfaces at multiple points.
Scale unit mounting surface
<Example of installation using the head unit lower reference surface>
Head unit mounting surface
Head unit mounting base
Gauge
Rotating part