Laserscale SET-HD100, Instruction Manual

Page: 38 / 74

SET-HD100
(2)
(E)
Warning
Do not use with other than the specifi ed power voltage.
Do not use this system with other than the specifi ed supply voltage.

Failure to observe
these precautions
may result in fi re or
electric shock.
Be sure to connect the ground.
Connect the ground terminal with a ground wire.
Do not disassemble.
Do not disassemble or modify the product.

Failure to observe
this precaution
may result in fi re
or injury.
Cut off the sources of drive power before working on the
device.
Be sure to always cut off the power supply or other sources of drive
power before proceeding with the work.

Failure to observe
this precaution
may result in fi re
or accident.
Do not install with wet hands.
Do not perform installation work with wet hands.

Failure to observe
this precaution
may result in
electric shock.
Do not look into the laser emission areas.
T h i s d e v i c e i s a c l a s s 3 B ( D H H S : I I I b ) l a s e r p ro d u c t u s i n g
semiconductor lasers with a wavelength of 790 nm that is inside the
visible range. The maximum output of the laser is 5 mW. The laser
beams emitted from the head unit interior are hazardous to the
human body.
Never look into the laser emission areas of the head unit while the
power is on, as light may leak. Also do not emit the lasers before
installation.
This product complies with the following standards.
International standards
Th i s p ro d u c t co m p l i e s w i t h s a fe t y s t a n d a rd s i n c l u d i n g
EN60825-1.
Japanese Industrial Standards: JIS C 6802
This product complies with the safety standards for laser products.
CDRH regulations: DHHS 21 CFR
This product complies with CDRH (Center for Devices and
Radiological Health) regulations concerning laser products.
Products sold within the U.S. must comply with this standard.

Failure to observe
this precaution
may result in
injury.