Larson Davis 831 User Manual Download Page 382

Page: 382 / 548

Model 831 Manual

Wireless Tab

20-7

and press

to open the Modem Menu, shown in FIGURE

20-8.

FIGURE 20-8 Modem Menu

Use the

key to highlight

Off

and press

to make the selection.

APN

Each cellular provider has a unique APN (Access Point
Name) which is to be entered into this field.

APN Username/APN Password

Some cellular providers will also supply a specific APN
Username and Password which must be entered into these
fields.

Password

The password field is for a user-defined password that will
be used to authenticate with an application, such as SLM
Utility-G3.

Setup

Step 1

Use the System Properties

Preferences

tab to set

the USB Host Port On.

Step 2

From the

Communications

tabs use the Wireless

tab to set the wireless modem On.

In addition to a Model 831 with firmware version V1.5 or
higher, the following devices are required:

•

Model 831 Option file with the Advanced
Communication option.

•

MultiModem EDGE wireless modem with firmware 2.0
or higher

•

SIM Card (with a data plan)

•

Powered USB Hub

Summary of Contents for 831





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 831

Reviews:

Related manuals for 831

Brands by name

Popular brands

Larson Davis 831, User Manual

Search results

Summary of Contents for 831

Reviews:

Related manuals for 831

Brands by name

Popular brands