laguna TS SERIES, Manual

Page: 19 / 78

19
loosening the clamp screw, and adjusting the jacking screws, the plate can be adjusted for
level to the table, and for parallel to the table. Ensure that the clamping screws are tight
before you use the saw.
Retaining clip
Insert TSS throat plate
On the TSS, releasing the clips and sliding the insert towards the blade will remove the
insert.
Note. The blade will have to be in the down position. To fit a new insert, slide into
the throat plate and you will hear a click as the catches engage.
Dust port
The machine has a dust port at the back of the machine close to the ground. It takes a 4 “
diameter hose, and needs to be connected to a dust collector with a capacity of 1000
cubic feet per minute minimum [The stronger the dust collector the better].