laguna TS SERIES, Manual

Page: 36 / 78

36
Rust
The table saw is made from steel and cast iron. All none painted surfaces will rust if not
protected. It is recommended that the table be coated with wax. All moving none painted
surfaces should be lubricated / protected with a Teflon based lubricant.
Limit stop
Scoring unit fitted
Limit stop
Yellow dust cover
Tilt mechanism stops.
The machine is provided with two stops that limit the travel of the tilt mechanism. Both
stops come factory set, but should adjustment become necessary, it can be achieved by
loosening the lock nuts and adjusting the allen set screws.
Sliding table adjustment for vertical level with the main table .
Straight edge
Sliding table
The sliding table comes factory set and should be +_ 0,02” above the main table.
Should the sliding table need to be adjusted use the following procedure.