laguna TS SERIES, Manual

Page: 16 / 78

16
Switch cover shown open
To start your machine, release the red stop button by moving the button to the right. The
door will be released and the green button will be accessible. Press the green button, and
the machine will start. To stop the machine, press the red button.
The machine should never be started with both motors engaged . The main motor
must be started, and when at full steed, then the scoring motor started. If both motors are
started at the same time, excessive load is put on to the contactor, and it will burn out.
Riving knife adjustment Riving knife adjustment
To adjust the riving knife for different diameters of saw blade, loosen the clamp screw,
and slide the knife up or down or laterally to suite the blade selected. Once adjustment is
completed, ensure that the screw is re tightened.
To adjust the riving knife parallel and inline with the blade, four adjusting screws are
provided.
Locking rod
Fitting blade Arbor spacer