Mobile Dust Cyclone Manual
24
23. Secure the topping to the nut
on the foot peddle bar using (1)
M8x30mm hex bolt. Follow this step
on the opposite side.
24. Secure the movable supporting
brace on the foot pedal bar with the
octagon foot pedal using (2)
3/8”
x21mm hex bolts. Make sure
the bolt head is on the inside of the
octagon foot pedal. Adjust the
tightness of this bolt accordingly. If
this bolt is too tight, the Octagon
foot pedal will not work smoothly.
When too loose it will not pick up
the Octagon drum.
25.
Secure the movable supporting
brace on the foot pedal bar with the
octagon foot pedal using (2)
3/8”
x21mm hex bolts. Make sure
the bolt head is on the inside of the
octagon foot peddle. Adjust the
tightness of this bolt accordingly. If
this bolt is too tight, the Octagon
foot pedal will not work smoothly.
When too loose it will not pick up
the Octagon drum.
26. Apply foam tape to the cone
flange before attaching the drum
lid. Secure the Octagon drum lid to
the cyclone funnel using (6) 5/16” x
3/4” hex bolts, (12) 5/16” x 1” flat
washers and (6) 5/16” hex nuts.
Make sure to first attach all the
bolts before tightening. NOTE: The
lid will turn when the bolts have not
been tightened for alignment.
Failure to do will result in the drum
lid not being able to align with the
drum.
Octagon foot pedal
Movable supporting brace
You will find a tag on the cone with
the following warning. Take note
and remove tag when you have
completed this step.
Summary of Contents for PFLUX2
