Laguna Tools PFLUX2, Manual, Page: 23 / 50

Mobile Dust Cyclone Manual
22
15. Attach the canister filter end cap
to the canister filter using the (4)
latches. Cover the 4” hook up with
the 4” rubber plug.
16. Secure the lower triangular
support plate to the base using (2)
5/16” x 3/4” hex bolts and (2)
5/16” x18x2mm flat washers. Follow
the same steps for the opposite
side.
17. Locate the two-foot pedal bars
provided. There is a left side and
right side. To identify the correct
side, look for the protruding nut,
circled in red below. It should be
facing upwards when you place the
bars on the floor.
18. Ensure that the foot pedal bar is
the correct side and slide the Foot
pedal bar into the opening on the
lower upright support panel. Make
sure the end of the bar is on the
inside of the triangular support
plate. Follow the same steps for the
opposite side.
LEFT
RIGHT