Laguna Tools PFLUX2, Manual

Page: 24 / 50

Mobile Dust Cyclone Manual
23
19. Secure the top end of the foot
pedal bar to support bracket using
(4) 5/16” x1- 3/4” hex bolts,
(8)5/16” x18x2mm flat washers and
(4) 5/16” hex nuts. Make sure the
foot pedal bar is pushed all the way
to the end of the support bracket
(indicated by yellow arrows). Follow
the same steps for the opposite
side.
20. Secure the base of the foot
pedal bar to the triangular support
plate by holding the lower support
plate vertically up against the foot
pedal bar and securing the U
channel provided onto the foot
pedal bar using (2)
5/16” x1- 3/4” hex
bolts, (4) 5/16” x18x2mm flat
washers and (2) 5/16” hex nuts from
the inside out. Follow the same
steps for the opposite side.
21.
A
ttach the cover plate over the
foot pedal assembly. Secure using
(6) 1/4” x 3/4” hex bolts and (6)
1/4” x19x2mm flat washers. Follow
the same steps for the opposite
side.
22. Attach the two ends of the
Octagon foot pedal to the nut on
the foot pedal bar.
U Channel
Hex bolt head
on inner side