Laguna Tools PFLUX2, Manual, Page: 15 / 50

Mobile Dust Cyclone Manual
14
FUNCTION
Figure 3: High Frequency Remote Control Receiver and Manual Switch
HEPA Filter detection – will illuminate when filter cleans (automatic cleaning/override)
Full drum detection – when drum is full, buzzer* will constantly sound off and light will illuminate.
*When the drum is close to 70%-80% full; intermittent buzzing will occur; this is a normal state.
ON/OFF Switch – turns cyclone ON or OFF .
On board circuit breaker – Pops out if machine overloads. Press to reset.
Override – Press for (3) seconds to activate override cleaning while the cyclone is ON. You can also
activate this function by pressing the CLEAN button on the handheld remote for (3) seconds.
Receiver SET button – Used to program receiver.
ON/OFF Illuminate drum – controls the LED light on the drum lid to illuminate inside the drum for
visuals of the dust level.
Figure 4: Handheld Remote
PROGRAMMING THE REMOTE CONTROL
Requires a 12V, type 27A alkaline battery.
OFF button
ON button
*Remote set button
*Used to match up a new handheld
control with the remote switch
CLEAN button
ON/OFF Switch
Receiver SET button
Full drum detection
*includes sound alert.
HEPA Filter detection
On board circuit breaker
Override
ON/OFF button to
illuminate drum