Laguna Tools PFLUX2, Manual, Page: 26 / 50

Mobile Dust Cyclone Manual
25
27. Attach the full drum detection
sensor to the opening on the drum
lid located behind the cyclone
funnel. When securing the sensor
make sure the end of the sensor is
no longer than the drum lid rim. If it
extends beyond the rim, detection
will not function correctly.
28. Attach the LED light to the drum
lid using (6) M4x10mm Philip HD
Bolt, (6) 3/16
” flat washers and (6)
M4 hex nuts.
29. Attach the crossbar to the drum
lid and tighten using the two bolts
removed in the previous step. It
does not matter which position you
attach the crossbar.
30. Assemble the Octagon drum.
Locate the drum base panel, (it
does not matter which side faces
inside) and secure the (4) casters
using (16) 5/16” x 3/4” hex bolts,
(32) 5/16” x 1” flat washers and (16)
5/16” hex nuts.
Bottom end of sensor
Inner view of
drum lid rim
Crossbar