Laguna Tools PFLUX2, Manual, Page: 28 / 50

Mobile Dust Cyclone Manual
27
DO NOT SKIP THIS STEP!
35.
Once completing the assembly,
keep the drum laying on its side to
apply silicone to the inside of the drum
including the base and the top rim of
the drum before the rubber seal has
been attached to seal and prevent air
leakages. You will need to use a
caulking gun (not supplied).
36. Attach the rubber gasket to the
top inner edges of the Octagon
drum. The wider end of the gasket
goes up. Use tin snips to trim any
excess rubber gasket after
completing the seal.
37. Insert the plastic debris collection
bag inside the Octagon drum. Open
and spread out the plastic bag to the
corners and edges
38. Use (24) Round HD Philip bolts
3/16
” x1/2 ” and (24) Cap nut 3/16 ” to
assemble the drum insert together.
Place the drum insert inside over the
plastic bag in the Octagon drum.
Silicone
Rubber gasket
Drum insert