Laguna Tools PFLUX2, Manual, Page: 20 / 50

Mobile Dust Cyclone Manual
19
5.
With the help of another person
carefully
lift the upper cyclone
assembly high enough to place on
stands that you have completed in
steps 3 and 4. Take note on
precisely positioning the upper
cyclone assembly onto the three
lower upright supports. Using (6)
5/16
” x 3/4 ” hex bolts and (6) 5/16 ”
flat washers connect and secure the
upper and lower upright supports.
*The forklift is no longer required
for the next steps.
6. Secure the (3) upright support
reinforcement plates using (12)
5/16” x 3/4” hex bolts and (12)
5/16” x 1” flat washers.
7. Take the intake cylinder, cyclone
barrel and cyclone funnel and install
3 x 6mm foam tape to the rims on
each location shown.
- Top rim of the intake cylinder
- Top rim of the cyclone barrel
- Top and lower rim of cyclone
funnel