23
If you deliberately want to sand right up to the wall, you can push
the wall-protecting roller right out of the working area.
You can completely remove the wall-protecting roller if you want
to sand under low radiators or cupboards:
1
Switch off the machine and always pull the power supply
plug out of the socket!
2
Use the universal spanner to undo the screw in the middle
of the wall-protecting roller and push it into the front
position (Fig. 53).
3
Remove the two screws attaching the holder of the wall-
protecting roller to the attachment and remove the
complete wall-protecting holder (Fig. 54).
6.10 CHANGING THE WALL-PROTECTING ROLLER
Use original LÄGLER wall-protecting rollers only (Art. no. in
Section
11, Spare parts
).
1
Switch off the machine and always pull the power supply
plug out of the socket!
2
Use the universal spanner to remove the screw in the
middle of the wall-protecting roller (Fig. 53, 1.).
3
Remove the old wall-protecting roller.
4
Insert the bush in the new wall-protecting roller and place
it on the holder for the wall-protecting roller with a washer
on each side. Ensure that the middle of the roller is located
over the nut in the holder.
5
Turn the screw through the bush drill hole into the nut.
6
Adjust the position of the wall-protecting roller according
to your needs
(Section 6.9)
.
CHANGING THE WALL-PROTECTING ROLLER
6
Fig. 54
Remove the fixing screws and take off the complete
wall-protecting roller.
Fig. 53
Loosen the screw and move the wall-protecting
roller.
Pricing in this catalog is outdated
Summary of Contents for Flip
