![Lagler Flip Handling, Maintenance, Safety Download Page 24](http://html2.mh-extra.com/html/lagler/flip/flip_handling-maintenance-safety_3291568024.webp)
24
6.11 CLEANING THE MACHINE FOLLOWING
RESTORATION TASKS
Following restoration tasks, residual material consisting of
adhesive, wax or sealing lacquer may have accumulated on the
belt pulleys or in the attachment.
This can impair the running characteristics of the machine and
reduce the suction performance. This kind of soiling is indicated
in most cases by unsteady running, difficult starting, reduced
working speed and increased development of noise. The suction
performance also decreases. In this case, the V-belt must be
dismantled as described in
Section 6.2
and the attachment as well
as the flanks of the belt pulley be cleaned. Check the fan for any
deposits. Wear a respiratory protective mask (P3).
REGULAR CHECKUP
7
7
Regular checkup according to safety
regulations and VDE
The electrical operating equipment and machine parts must be
inspected at least once a year by an expert with respect to
electrical and mechanical safety, then be repaired as required,
and afterwards the operational safety must be confirmed by the
attachment of an inspection label on the machine.
The elements required for the dust suction system must be checked
at least once a year by an expert and then be repaired as required.
The functional efficiency must also be confirmed.
Make sure that only original LÄGLER spare parts are used for the
maintenance tasks. You should also make sure that your customer
service work is only carried out by LÄGLER or an authorised
LÄGLER-workshop.
The service passport of these operating instructions
(Section 12)
documents when and where your machine was serviced.
Please enter the serial number and the year of construction of
your machine in the space provided on the back cover of these
operation instructions (please see the rating plate). If you do
not do this, the service passport is invalid!
Fig. 55
The inspection label confirms the operational
safety.
ATTENTION!
Tests and testing intervals must comply with
and be performed in line with the applicable
regulations and legal requirements for your
country!
Pricing in this catalog is outdated
Summary of Contents for Flip
