Lagler Flip, Handling, Maintenance, Safety

Page: 5 / 44

5
INTRODUCTION
1
1.4 SAFETY INSTRUCTIONS
Please read the danger warnings carefully and also instruct your
employees or colleagues accordingly. Otherwise, these persons
could be exposed to danger or be injured.
When the sanding disk is touching the floor, the machine must not
be switched on in order to prevent injuries.
Use the tools, accessories and spare parts that have been made
by LÄGLER for the FLIP only. Otherwise, this could result in damage
to the machine, the processed object or for the operator.
Make sure the dust bag is properly fastened in order to prevent
unnecessary and unhealthy dust emissions for the operator and
the environment.
Incorrect transport operations will result in machine damage.
To prevent any damage due to fire or explosions, the dust bag
must be emptied after the work has been completed and the
contents then be stored outdoors.
Keep well away from fire sources.
Do not smoke in a dusty environment (e.g. while working with
the machine or emptying out the dust)
Risk of a dust explosion.
The power supply cable must be kept out of the work zone in order
to prevent any damage to mechanical or electrical equipment.
To exclude the possibility of the machine being started
unintentionally, the power supply must be interrupted by removing
the power supply plug from the socket after the machine has been
switched off!
In case of correct machine operation, the mandatory dust emission
values will not be exceeded. When emptying the dust bag, it is
advisable to wear a respiratory protective mask P3 (Art. no. in
Section 11, Spare parts ).
1.5 PROTECTIVE DEVICES
The following parts of the machine are protective devices and must
therefore always be keep in perfect condition:
attachment cover, short / long = dust protection, protection
against V-belts
attachment, short / long = protection against sanding disc
Pricing in this catalog is outdated