Lagler Flip, Handling, Maintenance, Safety

Page: 4 / 44

4
INTRODUCTION
1
1.1 FEATURES OF THE MACHINE
In figure 1 (page 2), we have included the designations of the most
important components of the FLIP. Take your time to become
familiar with the machine.
1.2 DESCRIPTION OF THE MACHINE
The FLIP edge-sanding machine works with a sanding plate on
which Velcro sanding discs can be fastened. Traditional sanding
discs fastened with a tensioning screw can, of course, also be
used. The work zone is protected by the attachment. The fan
housing, on which the electric motor is mounted in vertical position,
is located on the attachment. A motor power supply cable is used
to connect the machine to the power supply system. The motor
switch with ON / OFF is located on the right-hand side of the motor
in the switch box. The machine is moved by means of two guide
rollers at the rear side of the machine. The handles are located on
top of the motor.
A rotable elbow piece mounted in a tube socket on the rear of the
fan housing, feeds the sanding dust into the dust bag. The dust
bag is connected to the elbow piece via a flange with two quick-
release fasteners. The power cord is fixed to the bag’s fixing bra-
cket by a Velcro tape so that it is kept out of the working area of
the machine.
The FLIP can only be used for dry processing operations. Never
use the FLIP for wet processing operations (life-threatening risk)!
1.3 PROPER USE AS INTENDED
The edge-sanding machine FLIP is suitable for the dry sanding of
wooden floors, cork floors and wooden stairs in the professional
and rental business sectors.
Any other form of use without the approval of the manufacturer is
not permitted.
No wet processing operations!
Introduction
You have purchased a high-quality product
from LÄGLER. We wish you great success
with your FLIP. This machine was
manufactured using the most modern
methods of production. All LÄGLER
products are subjected to a thorough
inspection before leaving the factory.
Please read these operating instructions
carefully before you start working with
your FLIP for the first time. These operating
instructions include important information
on work safety and will give you answers
to many questions so that you can work
with the machine safely and without any
problems. If you cannot find a specific
subject in this manual, please refer to your
sanding instructions manual or contact our
service department. Our qualified service
technicians are extremely familiar with the
FLIP and are highly trained. They will
provide you with the best possible advice
and support.
Pricing in this catalog is outdated