LABORIE Urocap IV Owner’s Manual UC4-UM01
19
●
The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID) and a wireless
password.
●
The wireless network name is the name of your wireless network.
●
The wireless password prevents other people from connecting to your wireless network without your
permission. Depending on the level of security required, your wireless network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless network, you can
sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security password or cannot remember this information, see the
documentation provided with your computer or with the wireless router. If you still cannot find this information,
contact your network administrator or the person who set up the wireless network.
4.5.2
SET UP THE PRINTER ON YOUR WIRELESS NETWORK
To set up the printer on your wireless network use the Wireless Setup Wizard from the printer control panel
display to set up wireless communication.
1. On the printer control panel display, from the Home screen, touch
(Wireless).
2. Touch
(Settings).
3. Touch Wireless Setup Wizard or Wi-Fi Protected Setup.
4. Follow the display instructions to complete the setup.
If you are already using the printer with a different type of connection, such as a USB connection, follow the
instructions in Change the connection type on page 20 to set up the printer on your wireless network.
4.5.3
PRINT USING WI-FI DIRECT
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for Using Wi-Fi Direct
●
Make sure your computer or mobile device has the necessary software.
o
If you are using a computer, make sure you have installed the HP printer software.
o
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first
and then install the printer software. Select Wireless when prompted by the printer software for
a connection type.
●
Make sure Wi-Fi Direct for your printer is turned on.
●
Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
●
Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to a
network using a wireless connection.
●
Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To Turn On Wi-Fi Direct
1. On the printer control panel display, from the Home screen, touch (Wi-Fi Direct).
