6 Site Preparation
This part is intended to help in the setting out and installation of the drive into the floor.
Your
Vista SMP
underfloor door system may not necessarily have all the possible operating elements described
within. Refer to the project specification for clarification of the operating elements supplied.
Please read through the following sections carefully, paying particular attention to dimension and accuracy of
setting out. Mistakes made during the early stages of installation can be costly in terms of time and money. IF IN
DOUBT ASK.
Caution:
To prevent damage to the drive:
It is essential to fit door stops for the door in both open and closed
positions. These can be fitted just prior to hanging door leaves but
provision in terms of location and suitable choice should be considered in
advance (barrier with built in stop in open areas). The drive may not be
commissioned without correctly fitted door stops.
NOTE: Example layout diagrams and specifications in this document are for example/guidance purposes only and
reference should be made to your project specification for full details of equipment sup-plied.
9
Summary of Contents for Vista SMP
Page 56: ...VISTA SMP Made in UK ...
