Label Vista SMP, Installation Manual

Page: 26 / 56

16) GENERAL PROGRAMMING MENU
To enter the general programming menu while the automatic door operating program is shown on display, keep button pressed
for about 5 seconds.
The programming menu consists of different sub-menus divided by subject (Diagram 1).
Select the section you want to have access to by using F1 button >> .
The menu icon selected is highlighted and the section title is shown on display top side.
To enter the selected sub-menu, give a quick pulse on ENTER button.
To exit the general programming menu and return to the operating program view, press EXIT button.
DIAGRAM 1
5”
EXIT EXIT EXIT EXIT
F1 F1 F1 F1
» » » »
ENTER ENTER UNUSED ENTER
“INITIAL SET-UP” “FUNCTIONS AND REGULATIONS” “LANGUAGE”
SECTION SECTION SECTION
EXIT EXIT EXIT EXIT
F1 F1 F1
» » »
ENTER ENTER UNUSED ENTER
“SERIAL “PASSWORD “MAINTENANCE ”
COMMUNICATION
MANAGEMENT”
SECTION
SET-
UP”
SECTION
SECTION
 Refer to par. 14.4 when entering the initial set-up section.
 Refer to par.14.3 when entering the serial communication setups for single-leaf door; see para. 26.2 for two-
leaf  swing door.

For the other sub-menus, refer to the following paragraph on the section you have had access to

26