LED MEANING
FIG. 1
FIG. 3
LED OFF
LED ON
LED BLINKING SLOW
1
3
full memory or transmitter already saved
LED BLINKING FAS
transmitter saving
SPYC
LED BLINKING VERY FAS
memory cancellation
FIG. 2
25)
DISABLED PEOPLE COURTESY FUNCTION
Enable this function by setting function
F12=ON
on the digital programmer N-DSEL.
The inputs suitable for use by disabled people must be connected to the START or OPEN input terminals.
Even the remote control SPYCO combined with radio receiver EN/RF1 can be used as disable people input.
Adjust the pause time (parameter P05
on the digital programmer N-DSEL
) to hold the door open for a sufficient time to allow
the disabled person to be able to pass through the door before the automatic closing.
If at the end of the opening cycle or during the pause time, the safety sensor in closing detects the presence of the disabled
people, the pause time is reduced to 3 seconds (even if is set at higher value) after which the door closes .
The door closes immediately without taking into account the pause time if the opening is activated by external radar input ,
internal radar input or with a manual push if push & go function is enable.
46
Summary of Contents for Vista SMP
Page 56: ...VISTA SMP Made in UK ...
