85
The measuring condition No. cannot be changed when other than selected signals are input.
6-5. INITIAL SETTING
6-5-1. Meas. Select Signal (Measuring Condition Selecting Signal)
Sets a signal for selecting a measuring condition number.
・
For key operation:
Sets the measuring condition No. by pressing
key on the “
Meas. Cond. Setting
”
window.
・
For control input:
Sets the measuring condition No. with the combination of ON/OFF setting from the
“Measuring condition select 0” to “Measuring condition select 3.”
・
For communication: Sets the measuring condition No. with the RS command.
<Setting Range>
Key operation, Control input, Command
<How to operate>
1) Press the
key on the “
Measuring
” window.
2) Press the
key on the “
Setting (1/2)
” window.
3) Press the
key on the “
Setting (2/2)
” window.
4) Press the
key on the “
Initial Setting
” window.
5) Press the target key and
key for the registration.
set.
The operations of WGA-910A and
external device are checked.
System
Self-Check
Operation Check
Next
1 / 2
Initial Setting
The signal to select the num-
ber of measurement condition
is set.
Return
Measure
Meas.Select Signal
Key Operation
Self-check of WGA-910A is con-
ducted.The program version and
serial No.are displayed.
The initial sets on system are
Setting
'Meas.Select Signal'
'System', 'Self/Operation
Measure
Initial Setting
Option Setting
Previous
2 / 2
Check'and 'SD Card'
'Communication', 'BCD Output',
'DA Output'and 'CC-Link'
are set.
NOTE