9
2. CONTROLS AND FUNCTIONS
2-1. FRONT PANEL
2-1-1. Measuring Window (Number)
1)
Hold
key
Manually starts a detection and holding.
2)
Switch
key
Display changes in order from “Number” - “Zoom in number” - “Waveform”
by pressing the key.
3)
[Detecting]
lamp
[Holding]
lamp
[Detecting]
lamp lights up in white during detection and [
Holding]
lamp
lights up in white during holding respectively.
4)
Comparator status lamp
When turning ON the comparator outputs, the [
HH]
and [
HI]
light up in red,
OK
lights up in white, and [
LO]
and [
LL]
lights up in yellow.
5)
Measured value
Displays a measured value with unit.
6)
Compared value setting key
Displays the “Compared value” setting window of comparator.
7)
Power LED
Lights up in green when the power is ON.
Lights up in orange while updating the firmware.
8)
ZERO
key
Conducts digital zero to set the display of the measured value to 0 (or
additional value).
9)
Set
key
Displays the setting menu window.
10) Measuring condition No.
Displays the current measuring condition setting No.
11) Operation mode
Displays “operation mode” of “measuring function.”
12) Compared value
Displays “Compared value” of comparators.
13) SD cap
Pull the rubber SD cap and insert a SD card to a slot.
kN
LL
LO
HI
HH
OK
Switch
- 150.00
- 999.99
HH
999.99
HI
500.00
LO
LL
Hold
Zero
Set
Detecting
Time Peak
Measure 1
Holding
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
