72
6-3-4-4. Time-specified peak and time-specified bottom
Capable of setting the “Detect Time”, “Delay time”, “Comparison Mode”, and “Display Mode.”
(1) Normal Display Mode
(A) Behavior with control input signal
When the HOLD command is turned ON
and after the lapse of delay time, the peak
(bottom) value is detected and indicated
for the preset detection time.
After the lapse of preset detecting time,
the indicated peak (bottom) value is kept
hold.
When the RESET command is turned
ON, the kept hold peak (bottom) value is
canceled.
(B) Behavior with key operation
Press the
key for the first time.After
the lapse of delay time, the peal value
(bottom value) is detected for the period of
the detecting block (detecting time) and the
value is kept hold.
Press the
key for the second time
to cancel the holding value.
(2) Hold Display Mode
(A) Behavior with control input signal
When the HOLD command is turned ON
and after the lapse of delay time, the peak
(bottom) value is detected.
The measured value immediately after
turning ON the HOLD command is kept
hold during the detecting block.
After the lapse of preset detecting time,
the peak (bottom) value during the
detecting block is kept hold.
When the RESET command is turned
ON, the kept hold display peak (bottom)
value is canceled.
(B) Behavior with key operation
Press the
key for the first time to
hold the display value at the time.
Though you cannot see, the WGA-910A is
detecting the peak (bottom) value after the
lapse of the delay time.
After the lapse of the detecting block
(detecting time), the peak value (bottom
value) before then appears.
Press the
key for the second time
to cancel the holding value.
