Kyocera TASKalfa 6551ci Operation Manual Download

Page: 131 / 570

3-19

Preparation before Use > Loading Paper

Press the (Paper Width Guide) Lock to release the lock. Grasp the paper width adjusting
tab and move the paper width guides to fit the paper.

Load paper.

Align the paper flush against the right side of the cassette.

Be sure that the paper length and width guides rest securely against the paper. If there is a
gap, readjust the guides to fit the paper.

IMPORTANT

• If paper is loaded without adjusting the paper length guide and paper width guide,

the paper may skew or become jammed.

• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the

multi-purpose tray. (Refer to

Before Loading Paper on page 3-17

• Before loading the paper, be sure that it is not curled or folded. Paper that is curled

or folded may cause paper jams.

• Ensure that the loaded paper does not exceed the level indicator (see illustration

below).

Example: For A4

Summary of Contents for TASKalfa 6551ci



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 6551ci

Reviews:

Related manuals for TASKalfa 6551ci

Brands by name

Popular brands

Kyocera TASKalfa 6551ci, Operation Manual

Search results

Summary of Contents for TASKalfa 6551ci

Reviews:

Related manuals for TASKalfa 6551ci

Brands by name

Popular brands