KYMCO MXU 500, Owner'S Manual

Page: 625 / 664

19
. STARTER SYSTEM
19-4
MXU 500
(From previous page)
x
Poorly connected terminal
x
Poorly connected starter motor cable.
x
Open circuit in starter motor cable.
x
Faulty starter motor.
x
Loose or disconnected starter motor cable.
x
Faulty starter MAG.
x
Faulty brake light switch.
x
Loose or poor contact of connector.
x
Open or short circuit in wire harness.
(Go to following page)
Abnormal
Starter motor
does not turn
Normal
Abnormal
Normal
Check for loose or poorly
connected starter MAG
terminals.
Abnormal
Check for loose or poorly
connected or broken starter
motor cable.
No clicks
Clicks
With the ignition switch
turned to “ON”, push the
starter switch and check for a
click sound from the starter
MAG.
Connect the starter motor terminal
directly to the battery positive
terminal (Because a large amount of
current flows, do not use a thin wire).
Starter motor turns
Normal
Check the starter relay coil
ground line (page 19-6)