59
Default:
Calibrate flow sensor
Default:
• SimStart : 1 (from FMC 1,20)
• Vsim: 8 km/h
• Q+/-SC : 0
Default:
Border nozzle Yes/No
(depending on machine
configuration)
default:
Fill in the section length
(depends on machine
configuration)
Default:
Fill in the section length
(depends on machine
configuration)
Explanation screen:
• Impulses pro liter
• Actual flow (l/min)
Explanation screen:
• 5 seconds simspeed after
switching on main valve
• Simulation speed
• Pressure regulator goes
back in a save mode after
main valve is switched off
Explanation screen:
Border nozzle
Explanation screen:
Working width of each section
Explanation screen:
Working width of each section
Default:
Fill in the section length
(depends on machine
configuration)
Explanation screen:
Working width of each section
Default:
Fill in the nozzle which are on
the spray line (depending on
machine configuration)
Default:
60
Explanation screen:
With he information of the
chosen nozzle the sprayer is
calculating
Explanation screen:
• Lower value = more
anticipation
• Higher value = less
anticipation
4.2
FMC-R screen information including parameters
Summary of Contents for TS-T
