Kverneland TS-T, Service Manual

Page: 64 / 94

64
Default:
No reg 0.8%
P zone 3%
T on 50 ms
T off 100 ms
Explanation screen:
• No reg = dead zone
• P zone = Area of P zone 1
• T on = time that the
regulator is active in P
zone 1
• T off = time that regular is
not active in P zone 2
Default:
Rev D 0s
P zone 6%
T on 50 ms
T off 100 ms
Explanation screen:
• Rev D= 3% extra active
regulator time when the
valve change direction
• P zone= Area of P zone 2
• T on = time that the regular
is active in P zone 2
• T off time that regular is not
active in P zone 2
Default:
2 sec.
Default:
Sp 50% (speed)
Fl 20% (flow)
PR20% (pressure sensor)
Al2 sec alarm delay time
Explanation screen:
• The time that the regulator
is not reacting after using
main valve
• Q low= Below this number
the software don’t look to
the flowmeter input, but
starts to calculate the flow
Explanation screen:
Filter values for the sensors
20% means 20 % new value
80% old value So lower value
in % more slower the signal.
4.2 FMC-R screen information including parameters
46
47