87
4.10
Calibration and explanation steering system
Step 9) adjust GAIN in the field
If the basic settings are done it is wise to check the settings in the
field and if necessary to fine tune them.
Switch to AUTO mode and make sure the booms are folded out.
Drive in a circle, the wheels must follow in the track of the rear
wheels of the tractor.
IF NOT
If the wheels are
inside the tractor track
Adjust to a
lower GAIN
If the wheels are
outside the tractor track
Adjust to a
higher GAIN
If there is a difference between left and right
Adjust the GNL and GNR for each side
Summary of Contents for TS-T
