92
5.3
Testing screens
5.4
Calibrating electronic level indicator
For a good calibration process please follow up the steps one by one.
Step 1.
Calibrate your spray flow meters in a correct and precise way. (look in your instruction manual for more detailed information.
Step 2.
Fill up the tank with clean water.
The tank has to be filled with the Normal t100 liter (Ixter)+40Liter (Ikarus S).
Make sure the float in the tank is not touching the top of the tank. (Special attention with Ikarus S)
To fill the tank with a not calibrated machine can only be done in the filter cleaning position.
Step 3.
Go to screen
Calibration
Step 4.
Press the
Button and the screen
will appear.
Step 5.
Press the
Button and the screen
will pop-up
Summary of Contents for TS-T
