40
Installing the Inverter/Charger
This guide for use by qualified personnel only.
7. Check to ensure that the sensor and all wires are held
firmly and cannot be moved.
8. Turn the battery switch on again (if you opened it in Step
2.)
9. Route the sensor cable to the inverter/charger and plug it
into the blue BTS port, as shown in Figure 13. Secure the
cable along its length.
Figure 13
Connecting the BTS Cable to BTS Port
In
vert
er
Reset Enable
Inve
rter A
C/
Enabled
Cha
rge F
a
F
BTS port
Summary of Contents for 091-269-12-2000
Page 2: ......
Page 31: ...1 Blank Page for future use...
