Installing the Inverter/Charger
Step 2: Mounting the Inverter/Charger
Considerations
Before mounting the
$XWR3RZHU
, take the following two
factors into account.
The weight of the
$XWR3RZHU
inverter/charger requires
two people to install it.
Mounting considerations are shown in Figure 6 on page
2
.
The
$XWR3RZHU
mounting orientations are shown in Figure
6 on page 2
.
Mount your inverter/charger before you connect any wires
or cables.
To mount the inverter/charger:
Remove the inverter/charger from its shipping container.
Verify that all components are present
Select an appropriate mounting location and orientation.
To meet regulatory requirements, the
Auto Power
must
be
mounted in one of the orientations shown in Figure 6 on
page 2
.
Mark the position of the mounting holes.
Pilot drill the six mounting holes.
Fasten the inverter/charger to the mounting surface with
six
1/4" pan-head steel screws.
HEAVY LOAD HAZARD
•
The
Inverter/Charger
is
heavy
(see
“Inverter/Charger
Physical
Specifications”
on
page
62)
.
Do
not
lift
the
unit
by
yourself.
Use
two
people
to
lift
and
mount
the
unit.
Always
use
proper
lifting
techniques
during
installation
to
prevent
injury.
• Make
sure
that
the
wall
can
support
a
load
of
up
to
70
lbs
(32
kg).
• Do
not
install
in
plasterboard
(drywall)
using
dywall
anchors.
Attach
the
unit
to
wall
studs.
Use
appropriately
sized
screws
depending
on
wall
material
and
thickness.
Failure to follow these instructions can result in minor or moderate injury
Summary of Contents for 091-269-12-2000
Page 2: ......
Page 31: ...1 Blank Page for future use...
