Kurz 410FTB, Operation Manual

Page: 36 / 165

Kurz B ‐ Series Operations Guide 2– 3
B ‐ Series Flow Meter Display Mode Options
Display Mode
Pressing the D key enters Display mode, which provides view ‐ only access to the meter’s
configuration parameters. If you want to know basic configuration information, it can be much
quicker by viewing one of the log files created in Log mode or using KzComm. See the Log mode
options on page 4 ‐ 47, and refer to the KzComm User’s Guide for more information. You can scroll
through the menu or quick jump to any of the following options.
Note
Functions with (

) support Hart.
Table 2 ‐ 1. Display Mode
Option # Function Description
1 BASIC SETUP Basic meter setup
2 FLOW CUTOFF Flow cutoff
3 FLOW CF/TC Flow correction factor and time constant
4 RESET TOTAL Flow totalizer reset setup
5 AOUT 1 Analog output #1 setup
6 AOUT 2 Analog output #2 setup
7 RUN DISPLAY Run mode display setup
8 ASSIGN DOUT Relay output setup
9 ALARM SETUP Alarm setup
10 NE ‐ 43 ALRM NE ‐ 43 alarm setup
11 PULSE OUT Pulse output setup
12 PURGE TIMR Sensor purge setup
13 CALIB DATA Flow calibration parameters setup
14 CALIB AOUT Calibrate analog outputs
15 VRMS DATA Variable flow correction data
16 REMOTE CF Remote correction factor data
17 CAL CURVE Gas calibration curve selection
18 DATA LOG Data logging setup
19 MODBUS COM Modbus communication setup
20 EXT AINPUT External input setup
21 PID SETUP PID data setup
22 PID CONTRL Manual PID adjustment
23 DRIFT CHCK Drift check setup
24 CHANGE PW Change user password
25 GET EEPROM Update from EEPROM
26 BOOTUP DLY Set bootup output delay