Kurz 410FTB, Operation Manual

Page: 129 / 165

Kurz B ‐ Series Operations Guide 4–56
Program Mode Advanced Setup
This low output limit is the lowest flow rate or velocity. This high output limit is the
highest flow rate or velocity. Both are based on the CONTROL TO variable set point that
the meter will control.
PID LOW LIMIT
>0.00000000 SFPM
PID HIGH LIMIT
>6000.00000 SFPM
Refer to “Option 21 — Setting Up PID Data” for setting up the analog output. Output
will saturate 10 percent below the specified value. The limit also prevents
accumulation.
11>
Use the numeric and decimal keys to enter the PID low and high limits, and then press E .
Press P to skip to the prompt without making changes.
Prompts appear for specifying the analog output.
AO# FOR PID
>2
The AO# prompt allows you to assign PID to analog output 1 or 2.
ANALOG OUTPUT 2
>PID ^v
In the event the defined analog output is pre ‐ assigned, the second prompt allows you
select PID.
AO2 at 4mA
>0.00000000 SFPM
AO2 at 20mA
>500.000000 SFPM
The final prompts are for setting the 4 ‐ 20 mA settings.
12>
Use the numeric, decimal, and arrow keys to enter the necessary values for each prompt,
and then press E .