Kurz 410FTB, Operation Manual

Page: 25 / 165

Kurz B ‐ Series Operations Guide 1– 12
B ‐ Series Flow Meter Modes & Menus
13
(con’t)
Gas Name
# VM Data Sets ( x )
Gas Mol Wt
New Ref Density
This is velocity
temperature
mapping.
Flow Data for S1
# Data Pts At S1 ( x )
Raw Signal S1 ‐ 1
Flow Data S1 ‐ 1
Raw Signal S1 ‐ x
Flow Data S1 ‐ x
(Raw Signal and Flow Data repeat)
Flow Data for S x (optional)
# Data Pts at S x ( n )
Raw Signal S x ‐ 1
Flow Data S x ‐ 1
Raw Signal S x ‐ n
Flow Data S x ‐ n
(Raw Signal and Flow Data repeat)
14 CALIB AOUT Calibrate Analog Outputs
Set 4.000 mA to Out 1 (

)
Set 20.000 mA to Out 1 (

)
AO1 Calib Coeff
A01 Slope
A01 Offset
Set 4.000 mA to Out 2 (

) (optional)
Set 20.000 mA to Out 2 (

) (optional)
This calibrates the
digital ‐ to ‐ analog
converter that
generates the
4 ‐ 20 mA signal
output.
AO2 Calib Coeff (optional)
A02 Slope
A02 Offset
Chk NE ‐ 43 Alarms
YES NO
If YES
Low Alarm Check
High Alarm Check
Enter output mA
mA and equivalent
15 VRMS DATA Variable Flow Correction Data (

)
Enter # of Flow Data Sets n
Enter Flow Data Set # x
Ref Value R x (Vrms ‐ x )
Test Data D x (VdsAve ‐ x )
This should only be
changed with
approval from Kurz.
Table 1 ‐ 1. Program Mode Functions (continued)
Option
#
Function Parameters / Description Purpose